|
TITEBOND II PREIMUM WOOD GLUE |
|
| Physical Properties (Typical) |
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond. |
|||||||||||||||||||||||||||||||||||||||||||||||
| Application Guidelines | Application temperature Assembly time after glue application Minimum required spread Required clamping pressure Methods of application Cleanup |
|||||||||||||||||||||||||||||||||||||||||||||||
| Bond Strength ASTM D-905 (On Hard Maple) |
|
|||||||||||||||||||||||||||||||||||||||||||||||
| Product Features |
|
|||||||||||||||||||||||||||||||||||||||||||||||
| Limitations | Titebond II Premium Wood Glue
passes Type II water-resistance tests. Do not use for joints below the
waterline or continuous submersion. Do not use when temperature, glue or
materials are below 55°F. Freezing may not affect the function of the
product but may cause it to thicken. Agitation should restore product to
original form. Because of variances in the surfaces of treated lumber, it is
a good idea to test for adhesion. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. |
|||||||||||||||||||||||||||||||||||||||||||||||
| Caution Statement | No caution information is needed. Please refer to the Material Safety Data Sheet for further information. | |||||||||||||||||||||||||||||||||||||||||||||||
| Ordering Information |
|
|||||||||||||||||||||||||||||||||||||||||||||||
| Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use. | ||||||||||||||||||||||||||||||||||||||||||||||||